IVD 2.5" STAGE 1 SUSPENSION SYSTEM W/ EXPANSION PACK - 2023 - FORD F250/F350 - GAS
May have applicable lead time. Direct ships from Manufacturer
This 2.5" suspension system from ICON is the perfect way to elevate your 2023 Ford F-250/F-350 Super Duty and enhance both its ride quality and performance. Specifically designed for rough construction sites, country roads, and even towing, this beginner level system will give you a smooth ride on the highway. It features dual rate coil springs for gas engines, alignment cams for increased caster, rear leaf spring expansion packs with blocks and U-bolts to reduce axle wrap and improve ride comfort, and ICON's 2.0 Aluminum Series internal reservoir shocks for both the front and rear. After extensive testing and fine tuning, ICON has created the ultimate suspension solution for your truck.
FEATURES & BENEFITS
- ICON engineered dual rate coil springs provide 2.5” of front lift over stock
- Vehicle specific tuned internal reservoir 2.0 Aluminum Series shocks
- Application specific alignment cams ensure proper caster alignment
- Leaf spring expansion packs and blocks for more compliant ride quality and reduced axle wrap
- Increased wheel travel and improved ride quality over stock with no change in towing capacity
- Less body-roll than stock
- Lifetime guarantee that springs won’t sag or break
- No drive shaft modifications required
- Shocks are fully rebuildable and re-tunable
- 100% Bolt-on system - no drilling, cutting or welding necessary for install
TECH INFO:
- OEM Wheels & Tires Fitment: Yes
- Recommended Aftermarket Tires: 35" x 12.50" (37" x 12.50" tires may fit but fender trimming and modifications will be required.)
- Recommended Aftermarket Wheels: ICON Alloys - 17x8.5" w/ 5” Backspace / 6mm Offset
- Recommended Aftermarket Wheels: ICON Alloys - 18x9" w/ 5.25” Backspace / 6mm Offset
- Recommended Aftermarket Wheels: ICON Alloys - 20x9" w/ 5.25” Backspace / 6mm Offset
- APPLICATION NOTE #30: An Adjustable Track Bar May Be Needed To Realign The Axle From Left To Right, Or To Add Additional Strength
- APPLICATION NOTE #119: Rare Cases Require A 2.6 Degree Alignment Cam On One Side Of Vehicle For Proper Caster Split
- APPLICATION NOTE #151: Fits Single Rear Wheel Models Only
- APPLICATION NOTE #156: Springs Are Rated For Gasoline Engines
- APPLICATION NOTE #157: Lift Heights Based On 4WD Crew Cab Gas
- TECH NOTE: Replaces OE rear blocks for .5" of rear lift over stock on F-250. Lowers F-350 rear ride height by .5" compared to stock.
- TECH NOTE: Compatible with 4WD models only
- TECH NOTE: Trucks equipped with Tremor package with have front lift height of 1.5" over stock
- TECH NOTE: Not compatible with models equipped with OnBoard Scales
- TECH NOTE: Not compatible with F-350 Cab & Chassis models
- TECH NOTE: Brake line kit (Part # 61111) is optional for end users who do not want to bend the factory steel lines or are looking for a braided stainless upgrade (not necessary for complete install)
- TECH NOTE: ICON track bar bracket part # 64039 is also recommended to correct bump steer geometry
SYSTEM COMPONENTS:
- 62513 (QTY: 1) | 23 FORD F-250/F-350 FRONT 2.5” GAS DUAL RATE SPRING KIT
- 66512 (QTY: 2) | 05-23 FSD 4WD 2.5" FRONT 2.0 VS IR
- 66516 (QTY: 2) | 17-23 FSD REAR 0-2" 2.0 VS IR
- 168507 (QTY: 2) | 08-23 F250/F350 LEAF SPRING EXPANSION PACK
- 67004 (QTY: 1) | 11-UP FSD REAR 12" U-BOLT KIT
- 191201 (QTY: 1) | 1" CAST BLOCK KIT
- 61002 (QTY: 1) | 05-23 FSD 2" REAR BUMP STOP SPACER KIT