CARLI SUSPENSION SYSTEM PINTOP SYSTEM - POWER WAGON - 2010-2013 RAM 2500/3500

Sale price$5,663.00
LEAD TIME

May have applicable lead time. Direct ships from Manufacturer


The CARLI SUSPENSION SYSTEM PINTOP SYSTEM for the 2010-2013 RAM 2500/3500 is a highly-regarded suspension system that boasts the Performance 2.0" with a boost of strength. Our top selling system is versatile and provides an exceptional ride, especially when paired with our Full Progressive Leaf Springs. This system is the perfect all-around choice for any Ram owner, providing an elevated platform and the addition of 2.5" diameter shocks that surpass factory standards. While more expensive systems may offer increased off-road capabilities, the Pintop offers unmatched on and off-road ride quality at a better value. It's no wonder why this system remains our best seller and is highly recommended by industry experts.

In an effort to provide customers with the best product, we do not sell off-the-shelf King 2.5s. We designed a custom piston to determine proper base flow rates to ensure the shock works well in the heavy duty truck platform; we then tuned the shocks around the custom pistons based on seat-of-the-pants feel. We round off ALL our 2.5” King shocks with oversized (7/8”) shafts machined and polished from a solid piece of 17-4 Stainless. Unlike King’s standard shafts, there is no coating to wear off, weather is far less likely to hurt them and if there is a small chip, you can round the edges with emery cloth to ensure the seal housing isn’t damaged as they’re not brittle like the stock, hardened shafts. All King shocks are built with a plated steel body. If subjected to inclement weather for extended periods, we recommend wrapping your shocks in 3M to provide a moisture barrier that’s replaceable.

The Details: Your Power Wagon will sit ¾”-1” higher in the front (year/cab configuration dependent) thanks to the taller, lighter rate coil springs. The included, front, Bilstein 5100 shocks are longer to accommodate the extended travel and are tuned by Bilstein for increase the suspension control in the Ram 2500 platform.

In factory form, the Power Wagons have the same control arms and track bar as a standard Ram 2500 but a 2” taller coil and longer shock. As the Ram is a short arm design, this pulls the axle off center to the driver’s side about ½” and back toward the cab about ½”. With this system, an Adjustable Track Bar is included to shift the axle back toward the passenger side, re-centering it while and provide a stronger link with less deflection for the lifted application. To shift the axle forward to the center of the wheel well, we recommend a set of Extended Control Arms (especially when adding 1” of lift from the Carli Coil Springs). The control arms are not included in the system as there are two options to allow customers to select whichever is best for their wheel and tire application.

The Factory Sway Bar Disconnect with which the Power Wagons are equipped works great for those wanting the two ends of the spectrum, rigid or flexy. For those wanting to land in the middle of the spectrum between these two end points, Carli’s optional Torsion Sway Bar removes the entire factory sway bar assembly replacing it with a torsion bar supported by fabricated drop brackets and delrin bushings. Fabricated sway bar arms and dual 5/8” FK heim end links round off the package. This is the single best bang for the buck, ride-quality upgrade offered by Carli Suspension when compared to the locked, factory sway bar. The Carli Sway Bar allows nearly bind-free articulation in low-speed applications; when things heat up, it allows the Carli Shocks and springs to breath while engaging progressively to provide control in high-speed cornering situations. Removing the factory sway bar may disrupt the axle-locker wiring, hard-wiring the locker may be necessary.

With this system, matching rear, custom tuned, shocks are included and we recommend the full-progressive leaf springs be optioned for optimal ride quality.

Wheel and Tire: This system will fit up to a 37” tire with our High Clearance Control Arms and Full Progressive Leaf Springs on wheels no more than 9” wide with 5.75” of backspacing. If running factory control arms or wheels; we recommend an All Terrain 35” tire. The more rubber, the better the small bump compliance will be at proper inflation pressures. The ride will firm up as you go larger in wheel diameter.